Instructions / Assembly

This product was manufactured for household use only.
Read all operating instructions before installation and use.
Please save this operating instruction manual and place in
External appearance and specifications are subject ot change
for improvement of product without notice
an easily accessible location.
TABLE OF CONTENTS
READ ALL INSTRUCTIONS BEFORE USING.
Important Safeguards
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Connect this product to a properly grounded outlet only.
Unplug the appliance during filling and cleaning.
Do not touch the power plug with wet hands.
Properly connect the power cord to the electrical outlet corresponding to the rated
voltage of the unit.
Keep the cord away from heated surfaces.
Do not use damaged or loose power cord.
Before removing the unit from the toilet bowl, disconnect the power plug first.
Do not connect other electrical appliances to the same power socket connected to the unit.
Children should be supervised
to ensure that they do not play with the appliance.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Never operate this product if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water.
Return the product to a service center for examination and repair.
Never block the air openings of the product or place it on a soft surface, such as a bed or
couch, where the air openings may be blocked.
Keep the air op
enings free of lint, hair, and the like.
Any other servicing should be performed by an authorized service representative.
Close supervision is necessary when this product is used by, on, or near children or invalids.
Do not dismantle, repair, or alter the unit.
To reduce the risk of burns, electrocution, fire or injury to persons.
To reduce the risk of electrocution.
Do not use while bathing.
Do not place or store product where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
Do not reach for a product that has fallen into water. Unplug immediately.
Important Safeguards
To reduce the risk of burns, electrocution, fire or injury to persons.
Never use while sleeping or drowsy.
Never drop or insert any object into any opening or hose.
Do not use outdoors. or operate where aerosol(spray) products are being used or where
oxygen is being administered.
Do not pour or spray water on to the unit.
Do not use steam cleaner.
Keep the unit away from fires or inflammable substance.
Do not connect to the industrial water supplies.
Caution against low temperature burns.
New hose-sets supplied with the appliance are to be used and that old hose-sets should
not be reused.
To reduce the risk of injury to persons or damage to the product or the property.
Do not place heavy objects or step on the unit.
It may cause product damage or injury.
When cleaning the unit, do not use any chemicals. Clean the unit with moist,
well-wrung soft cloth. For excessive stains, use soft cloth moistened with
mild dish-wash detergent and wipe out with dry cloth.
It may cause product damage.
Do not slam down the lid.
It may cause product defect.
Do not lean against the lid.
It may cause product defect.
When not in use for a long period of time, disconnect the power plug and drain
the water tank.
Tank water may be contaminated and cause skin troubles.
Do not twist or pull the connection hoses.
It may affect water supply or cause water leakage.
Do not cover up the warm air outlet or insert hands or other objects.
It may cause burn or electric shock.
Do not operate the unit during product malfunction.
Disconnect the power plug and call the authorized service center.
It may cause fire or electric shock if the unit is operated while it is out of order.
Grounding Instructions
2
3 4
8765
Connect T-valve
Insert the bidet body
- Mount the main bidet into the fixing holes.
- Align the front of the bidet body
and the front of the toilet before
fastening the nuts.
Insert the base plate.
Connect the water supply hose
- Connect the water supply hose to the
T-valve and the main body.
Turn the water supply valve
counterclockwise to allow water flow.
Washer
Nuts
Cone packing
Operation check
1. Turn the shut off valve counterclockwise to check for water leakage.
2. Connect the power plug into electrical outlet.
3. Check the function for each type of use.
Installation
7/8” T-Valve
Water Supply Hose
Base Plate
Bolt Cases
Before installation
Read the instructions carefully before installing.
Plug in only after complete installation then
supply water.
Installation guide
Separate water supply hose
Remove the existing toilet seat
- Turn the shut off valve clockwise to turn the
water off. Flush your toilet’s water tank
completely to empty. Disconnect the top of
- Save your toilet’s seat, lid, and nuts for
reinstallation later.
- Unfasten the nuts and remove the toilet seat.
Name of parts
Lid
Power Plug
Seat
Nozzle
Seat Sensor
Control Panel
Improper use of the grounding plug can result in risk of electric shock.
This product is for use a nominal 120v circuit and a GFCI
(ground fault circuit interrupter) receptacle is required for use
with this product. Do not use this product with an ungrounded
outlet. Do not use an extension cord with this product.
If you do not have a GFCI receptacle, contact a qualified
electrician to have installed.
Grounded Outlet
Grounded Pin
Figure A
Important Safeguards 2
Grounding Instructions
Name of Parts 5
Installation method 6
How to use
Maintenance
Troubleshooting
Specifications 13
Warranty 14
Existing water
Shut off valve
Thread from tank
Water supply
hose
Existing water
Shut off valve
- Install T-valve as shown
Installation hole
Mounting bolt
Base plate
Cone Packings
Washer
Nuts
- Align the base plate’s grooves with the toilet
seat holes.
- Insert the mounting bolt into the base plate
and toilet seat holes.
Base plate
Bidet Body
Main body
Hook
- Insert the main bidet into
the groove on the installed base plate.
SB-100C
TM
4
9
10
11
supply hose
the water supply
hose by using a wrench.
supply hose
Cone Packings Washers Mounting Bolts Nuts
USER MANUAL
DANGER
WARNING
WARNING WARNING
CAUTION
Memo