Owners manual

9
www.smartavi.com
Using HotKey Commands
The default factory hotkey is the left “ctrl” key. To use a hotkey command simply hit ctrl twice,
and then the appropriate command.
HOTKEY SEQUENCE FUNCTION EXAMPLE
hotkey + hotkey + Q + # Change to quad mode Ctrl + ctrl + Q + 2
(quad mode)
Hotkey + hotkey + F + # Change to full mode of channel
Hotkey + hotkey + P + # Change to picture in picture mode for
that channel (Note, user control will
default to the last channel selected.)
Ctrl + ctrl + F + 1
(full mode with ch. 1)
Hotkey + hotkey + U + # Change the user control
Ctrl + ctrl + P + 3
(picture in picture
mode with ch. 3 as the
main)
Hotkey + hotkey + O Bring up the OSD
-
Hotkey + Hotkey + B Re-Boot the HDMV-Plus -
RS-232 Operation and Console Commands
OR
US B to RS -232 Adapter Cable
RS-232 Cable
The HDMV-Plus may also be controlled via RS-232 commands; this feature requires an RS-232
card installed on your computer or a USB to RS-232 adapter. First connect the RS-232 cable
between your PC and the HDMV-Plus.
Next connect to the device using HyperTerminal or a similar serial
data application and an DB9 for RS-232 connection. The settings for
the connection are shown in the picture on the right.
Any serial data application similar to HyperTerminal will be able to
connect to the HDMV-Plus provided the Bits per second are 115200,
the data bits are set to 8, the Parity is “None,” the stop bits are “1,” and
there is no ow control. HyperTerminal comes standard on windows
XP and can be enabled on Windows Vista, Windows 7, and Windows
8. There are many applications available for windows, Linux, and
Mac operating systems.