Owners manual

HARDWARE INSTALLATION

1. Ensure that power is disconnected from DVN-4Trio.

2. Connect the DVI cables, USB cables (male-A to male-B), and audio cables from the computers to the

respective input ports on the DVN-4Trio.

3. Optionally connect RS-232 for control functions.

4. Connect a USB keyboard and mouse to the two USB ports with keyboard, mouse symbols

Note: These ports are dedicated for keyboard and mouse emulation. The USB 2.0 ports on the left are

for other USB peripherals (flash drives, printers, etc.)

5. Connect the speakers into the Audio Out port located above the USB ports.

Connect the display monitors to the DVI OUT connectors on the DVN-4Trio.

6. Power on all the computers, monitors and all other attached devices.

7. Power on the DVN-4Trio.

Figure5‐1