Owners manual

5
Figure5‐1
HARDWARE INSTALLATION
1. Ensure that power is disconnected from D2H-4P Quad.
2. Connect the DisplayPort cables, Audio and USB cables (male type-A to male type-B ) from the com-
puters to the respective ports on the D2H-4P Quad.
3. Optionally connect RS-232 for control functions.
4. Connect the USB keyboard and mouse to the two USB ports on the right .
Note: The 2 USB ports on the right are dedicated for keyboard and mouse with full emulation. The 2
on the left are for other USB peripherals (flash drives, printers, etc.)
5. Connect speakers to the out connector on the D2H-4P Quad.
6. Connect the HDMI Displays to the OUT connector on the D2H-4P Quad.
7. Power on the displays, Computers and other devices. Power on the D2H-4P Quad.