User's Manual

802.11b/g Wireless Card User Manual
18
Chapter
Chapter Chapter
Chapter 5. How to use the
5. How to use the 5. How to use the
5. How to use the WLAN
WLANWLAN
WLAN Utility(Access Point)
Utility(Access Point) Utility(Access Point)
Utility(Access Point)
5.1 Introduction
To set your 802.11b/g Wireless Card as an Access Point(AP), reference
In Access Point mode , your 802.11b/g Wireless Card as an AP . this allows you to set up
your wireless network without using a dedicate AP device. Up to 16 wireless station can
associate to 802.11b/g Wireless Card.
5.1.1 Additional Setup Requirement
To bridge wireless and wired using the 802.11b/g Wireless Card, The following
requirement must be met.
1. The 802.11g USB 2.0WLAN Adapter must be installed a computer connect to the
wired network.
2. Either configure network sharing or bridge the two interfaces(Wireless & Wired) on
the computer.
3. Set the wireless station’s IP address to be in the same subnet as the computer in
which 802.11b/g Wireless Card is installed.
5.2 The 802.11b/g Wireless Card Utility Screen
5.2.1 Select “ACCESS POINT” in the MODE field to display the screen as shown.
ACCESS POINT Mode
5.2.2 click “More Setting…
More Setting…More Setting…
More Setting…”in the 802.11b/g Wireless Card screen to display the screen as
shown.