User's Manual

802.11b/g Wireless Card User Manual
25


 Check whether the Setup is success
Check whether the Setup is successCheck whether the Setup is success
Check whether the Setup is success
Computer 1:
1. Enter into DOS MODE, and type “IPCONFIG”.
(Start → Run → Type cmd or command )
2. Check whether the IP address is 192.168.0.1, and the Subnet Mask is 255.255.255.0
(as shown above)
Computer 2:
1. IP address does not need to setup. The DEFAULT GATEWAY is 192.168.0.1.
2. Please follow the steps of “computer 1” to check whether the IP address is
192.168.0.1