User's Manual

802.11b/g Wireless Card User Manual
16
Figure 4-3-2 Advanced Setting
4.3.3.1 “Other
OtherOther
Other” group:
Press the “Advanced Setting
Advanced SettingAdvanced Setting
Advanced Setting” button, then the Advanced Setting page is shown as
Figure 4-4.
- Select the Window User Interface by the “Language
LanguageLanguage
Language” down drop menu.
If the English item is selected, all functions of window are described with English .
Select the Traditional Chinese item, and they are described with Traditional Chinese .
- At “Power consumption Setting
Power consumption SettingPower consumption Setting
Power consumption Setting” group, select which power save level want to be set
by checking CAM Mode, Fast Power-Saving mode or Maximum Power-Saving
mode. The default is CAM mode. If the most save mode want to use, select the
Maximum Power-Saving mode, but it throughput is lower than CAM and Fast
Power-Saving mode. The throughput of “Fast Power-Saving mode” is better than
“Maximum Power-Saving mode”, but its power save is less than “Maximum
Power-Saving mode”.
- At “Country Roaming
Country RoamingCountry Roaming
Country Roaming” group, the default depends on the region of EEPROM. Select
other region from “User Select” drop down menu, or check “World Mode” item to
set it to the word mode. When the word mode is set, it depends on the behavior of
AP. If the WLAN card is re-plug , the setting will return to default setting.
- At “Fragmenta
FragmentaFragmenta
Fragmentation Threshold
tion Thresholdtion Threshold
tion Threshold” bar, drop and move cursor to set the fragmentation
threshold point, the range is from 256 to 2346 bytes.
- At “RTS / CTS Threshold
RTS / CTS ThresholdRTS / CTS Threshold
RTS / CTS Threshold” bar, drop and move the cursor to set the RTS threshold
point, the range is from 0 to 2347 bytes.