User's Manual

802.11b/g Wireless Card User Manual
13
4.3 More Setting …
Click “More Setting
More SettingMore Setting
More Setting”icon of Figure 4-1 to enter More Setting
More SettingMore Setting
More Setting window
(Please see Figure 4-2.)
4.3.1 “General Connection Setting” group:
- Read the current status from the group if the “Chang
ChangChang
Change” button is not pressed.
- Press “Change” button for modifying the status, when the modification is finished,
press “Apply” to save it. The button “Change
ChangeChange
Change” and “Apply
ApplyApply
Apply” is alternately shown
on the same position.
SSID
SSIDSSID
SSID:
The SSID
SSIDSSID
SSID (Service Set Identifier), also known as the Network Name, must be
unique to distinguish itself as a particular wireless network. All wireless points in
the network area share the same SSID. Type your network SSID in the SSID field
to associate with access points or stations within the specified wireless LAN.
Channel
Channel Channel
Channel:
This is the radio channel used by wireless devices within the network for
communication. This command is only available while you are operating in the Ad
hoc mode. Specify the operating radio frequency channel from the pull-down menu
if you are the creator of the wireless network. If you are joining an existing
network you do not need to select the channel; configure the SSID and click Apply
Apply Apply
Apply
changes.
Note: The available channels differ from countr
Note: The available channels differ from countrNote: The available channels differ from countr
Note: The available channels differ from country to country. The chan
y to country. The chany to country. The chan
y to country. The channel number must be the same
nel number must be the same nel number must be the same
nel number must be the same
between the entries/stations within the network, so that each station can communicate with the
between the entries/stations within the network, so that each station can communicate with the between the entries/stations within the network, so that each station can communicate with the
between the entries/stations within the network, so that each station can communicate with the
other stations
other stationsother stations
other stations
TX Rate
TX RateTX Rate
TX Rate:
Select the transmission rate from “Tx Rate” drop down menu.
Ne
NeNe
Network Type
twork Typetwork Type
twork Type:
Select the “Ad_Hoc” or “Infrastructure” Mode from the “Network Type” drop
down menu.
Authentication
AuthenticationAuthentication
Authentication:
Select from the “Authentication” drop down menu:
Open System, Shared Key, Auto,
Open System, Shared Key, Auto,Open System, Shared Key, Auto,
Open System, Shared Key, Auto, WPA, WPA PSK, WPA2, WPA2 PSK
WPA, WPA PSK, WPA2, WPA2 PSKWPA, WPA PSK, WPA2, WPA2 PSK
WPA, WPA PSK, WPA2, WPA2 PSK
Encryption
EncryptionEncryption
Encryption:
Select from “Encryption” drop down menu: Disable, WEP, TKIP, AES
Disable, WEP, TKIP, AESDisable, WEP, TKIP, AES
Disable, WEP, TKIP, AES