User's Manual

Set WEP key
 Click the Set WEP Keys will prompt you a window to set
64bit or 128bit Encryption.
 Select HEX if you are using hexadecimal numbers (0-9,
or A-F). Select ASCII if you are using ASCII characters
(case-sensitive).
 Ten hexadecimal digits or five ASCII characters are
needed if 64-bit WEP is used; 26 hexadecimal digits or
13 ASCII characters are needed if 128-bit WEP is used.
Encryption: WPA (TKIP)
WPA (TKIP): If WPA is selected, users will have to select the Authentication modes
between Enterprise (RADIUS) and Personal (Pre-shared Key).
Pre-shared Key
Pre-Shared-Key serves as a password. Users may key in a
8 to 63 characters string to set the password or leave it
b
lank, in which the 802.1x Authentication will be activated.
Make sure the same password is used on client's end.
There are two formats for choice to set the Pre-shared key,
i.e. Passphrase and Hex. If Hex is selected, users will have
to enter a 64 characters string. For easier configuration, the
Passphrase (at least 8 characters) format is recommended.
19