User's Manual

14
SSID
The SSID differentiates one WLAN from
another, therefore, all access points and all
devices attempting to connect to a specific
WLAN must use the same SSID. It is case-
sensitive and must not exceed 32 characters. A
device will not be permitted to join the BSS
unless it can provide the unique SSID. An
SSID is also referred to as a network name
b
ecause essentially it is a name that identifies a
wireless network.
Channel Number
Allow user to set the channel manually or
automatically.
If set channel manually, just select the channel
you want to specify.
If “Auto” is selected, user can set the channel
range to have Wireless Access Point
automatically survey and choose the channel
with best situation for communication.
The number of channels supported depends on
the region of this Access Point. All stations
communicating with the Access Point must use
the same channel.
Enable Mac Clone (Sin
g
le Ethernet
Client)
If your ISP restricts service to PCs only, use
the MAC Clone feature to copy a PC Media
Access Control (MAC) address to your router.
This procedure will cause the router to appear
as a single PC, while allowing online access to
multiple computers on your network.
Apply Changes
Press to save the new settings on the screen.
Reset
Press to discard the data you have entered since
last time you press Apply Change.
Advanced Settings
It is not recommended that settings in this page to be changed unless advanced users want
to change to meet their wireless environment for optimal performance