User's Guide

19
3. Configuration
To change the log on password:
1. Type the new password in the New Password and Retype New Password fields, then click
Apply.
2. A message appears indicating that you have successfully changed the log on password.
The browser refreshes with the new password.
Use your new password when launching both the Wireless Setting configuration
window and Web Configuration utilities.
Regulation Domain
IEEE 802.11b/g networks are regulated worldwide since these networks use the 2.4GHz ~
2.5GHz ISM (Instrumentation, Scientific, and Medical) Band. The SAG-1010 is shipped with a
default regulation domain allowed in your country/location.
The FCC (US) and ETSI (Europe) specify operation from 2.4 GHz to 2.4835 GHz. For Japan,
operation is specified as 2.4 GHz to 2.497 GHz. For each supported regulatory domain, all
channels marked with “Yes” are supported. The channel center frequencies and CH ID numbers
are shown on the next page.
In a multiple cell network topology, overlapping and/or adjacent cells using different channels
can operate simultaneously without interference if the distance between the center frequencies is
at least 30 MHz. Channel 14 is specifically for operation in Japan.