User's Guide

25
3. Configuration
Restoring the default values
The following are the default values of the SAG-1010 (Ethernet adapter mode). You may restore
these values by pressing the reset button for more than five seconds.
Parameter Default value
Wireless Interface
SSID ………………………………………... ANY
Operating Mode……………………………. Infrastructure Mode
Channel …………………………………….. Auto
Station Mode …..…………………………… 802.11b/g
Transmission Rate ………………………… Automatic
Preamble …………………………………… Long
Authentication Method ……………………. Open System
Encryption ………………………………….. None
MACC loning ……………………………….. Disabled
Button Scan Mode
Enable Buttong Scanning……….………… Enabled
Scan Mode …………………………………. Find the connection with the
Strong est link quality
Default Gateway …………………………….. No saved profile