User's Manual

SmartAnt 7
1.3.3 Rear view
Ethernet port. This port c onn ect s th e
supplied RJ-45 plug and cable.
Powe r socket. This socket connects
the power adapter plug.
Reset button. Press this button for
m ore than five seconds to load the default values. In Ethernet adapter mode,
press this button for less than five seconds to connect to the first saved wireless
connection in the prof ile table.
Ethernet port
DC IN socket
Reset b utton
1. Product i ntroduction
1.4 LED indicators
T he SmartAnt S AA04-052 24A comes with a Ether net, Wire less, and
Power LED indicators. Refer to the table below for LED indications.
LED Status Indication
Ethernet On
The device is connected to a n Ethernet network.
Off The device is off or not connected to an Ethernet network.
Wireless On The device is associated with an AP or other wireless device.
Off The device is not associated with an A P or other wireless device.
Blinking The device is transmitting or receiving data.
Power On Thedeviceisonandready.
Off The device is off or performing boot sequence.
Blinking Firmware upgrade failed.