User's Manual

SmartAnt 51
Problem Action
TheSmartAntSAA04-05224A
PowerLEDcontinuouslyblinksfor
morethanaminute.
Turn off the SmartAnt SAA04-05224A.
Turn the device again and observe if
the Power LED stops blinking.
If the blinking continues, you need to
restorethe SmartAntSAA04-05224A
firmware. Use the Firmware
Restoration utility to restore or update
theSm artAntSAA04-052 24A
firmware.
Awirel essclientwantstoconn ect
totheSmartAntSAA04-05224A
but cannotgetthe correctIPfrom
the DHCPser ver .
(Th eSmar tA nt
SAA04-05224Ahasanenabled
DHCP.)
Make sure the DHCP server is
working properly.Some DHCP
servers can only assign one IP
address at a time. In this case, ass ign
a fixed IP address to yo ur Sma rtAn t
SAA04-05224A.
Troubleshooting