Product Information

9Version 01. SMACGI-D05-A1
Handling
Your SmartAC.com devices may be damaged by improper storage or handling. Be careful
not to drop SmartAC.com devices when transporting them.
Do not insert foreign objects into any openings, or vents or the area under the colored air
director on the back of sensor devices.
Servicing
Refer all servicing to qualied service personnel. Servicing is required when SmartAC.com
devices have been damaged in any way, such as when the Hub cord or plug is damaged,
liquid has been spilled or objects have fallen into a SmartAC.com device, or SmartAC.
com devices have been exposed to rain or moisture, do not operate normally, or have been
dropped. Contact [e-mail] for information about servicing SmartAC.com
devices.
Do Not Make Repairs Yourself
WARNING: Do not attempt to open SmartAC.com devices or disassemble
them. You run the risk of electric shock and voiding the limited warranty.
No user-serviceable parts are inside.
Location
Do not use SmartAC.com devices, supplied in the Hardware Kit, outdoors. The SmartAC.
com Hardware Kit is an indoor product. Do not place naked flame sources, such as
lighted candles, on or near SmartAC.com devices. Do not expose SmartAC.com devices
to dripping or splashing, and do not place any object lled with liquid, such as a vase, on
SmartAC.com devices. Do not move the SmartAC.com Hub if another device such as a
router, or network repeater device is connected to it.
Hub housing, cable and connector
Avoid prolonged skin contact with the plastic housing, cable, and connector when the
Hub is plugged into a power source, because it may cause discomfort or injury. Avoid
situations where your skin is in contact with the Hub, cable or connectors for long periods
of time when plugged in. For example, when the SmartAC.com Hub is plugged into a
power source, don’t sit or sleep on it or place it under a blanket, pillow, or your body. Take
special care if you have a physical condition that affects your ability to detect heat against
the body.
Discoloration of the power adapter cable and connector after regular use is normal. Dirt,
debris, and exposure to liquids may cause discoloration. To remove the discoloration
or if the cable becomes warm during use, disconnect power adapter cable and clean it
with a soft, dry, lint-free cloth. Do not use liquids or cleaning products when cleaning the
connector.
Medical device interference
The SmartAC.com Hub and sensor devices contain components and radios that emit
electromagnetic elds. These electromagnetic elds may interfere with medical devices,
such as pacemakers and debrillators. Consult your physician and medical device
manufacturer for information specic to your medical device and whether you need to
maintain a safe distance of separation between your medical device and SmartAC.com
devices. Stop using all SmartAC.com devices if you suspect they are interfering with your
medical device.