Product Information
8 SmartAC.com Hardware Kit - Product Information
Important Safety Instructions
WARNING: Failure to follow these safety instructions could result in re, electric
shock, or other injury or damage to SmartAC.com devices or other property.
• Read and follow these instructions to use SmartAC.com devices safely.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use the SmartAC.com Hub, Comfort Sensor, or Filter Sensor near water.
• Clean only with a dry cloth.
• Do not install on or in direct contact with major heat sources such as heating
elements, boilers, or other devices that produce extreme heat.
• Do not place naked flame sources, such as burners or pilot flames, on or near
SmartAC.com devices.
• Protect all cords, including the power cord and ethernet cable, from being walked on
or pinched, particularly at the plugs and connectors.
• Only use attachments/accessories and batteries specied by SmartAC.com. Visit
help.smartAC.com for a list of suitable replacements.
• Remove the batteries from the sensor devices when depleted or unused for long
periods of time.
WARNING: To reduce the risk of re or electric shock, do not expose SmartAC.
com devices or accessories to chemicals, excessive heat, or naked flames.
Power
SmartAC.com Hub and sensor devices have no on/off switch. To disconnect the Hub from
power, you must disconnect the power adapter from the device or outlet. To disconnect
the sensor devices from power, you must remove the batteries from the device.
Power the Hub with the included SmartAC.com power adapter cable, or with other third-
party microUSB cables, and a compatible power adapter that is compliant with USB 2.0
or later and with applicable country regulations and international and regional safety
standards, including Audio, Video and Similar Electronic Apparatus – Safety Requirements
(IEC 60065). Using counterfeit or damaged cables or chargers, or charging when moisture
is present, can cause re, electric shock, injury, or damage to the SmartAC.com Hub or
other property. When connecting a power adapter to SmartAC.com Hub, make sure the
plug is fully inserted into the connector before you plug the adapter into a power outlet. It’s
important to keep the Hub and the power adapter in a well-ventilated area when in use.
Device Information
Information such as the model number and FCC ID is located on the bottom of the Hub,
and the back of the sensor devices.