Product Information
7Version 01. SMACGI-D05-A1
About the SmartAC.com Hub status light
The status light on the top of the Hub indicates the following:
If the Hub is The status light...
Connected to WiFi with internet access Is solid blue
Off or in standby Is off
Starting up Is solid orange (or red)
Is in initial setup mode Flashes orange (or red) slowly
In WPS mode Flashes orange (or red) quickly
Connected to Wi with no internet access Is solid orange (or red)
Is in sensor pairing mode Flashes blue
About the SmartAC.com Sensor device status light
The status light on the front of the sensor devices indicates the following:
If the Sensor device The status light...
Starting up Is solid for 2 seconds followed by:
Flash once = Comfort sensor
Flash twice = Filter sensor
Flash three times = Water sensor
Is off or in standby Is off
Is in sensor pairing mode Flashes blue quickly
Has low battery level Flashes blue periodically
Note: Features may be updated or added periodically to SmartAC.com devices via remote
rmware upgrades. These changes or upgrades may affect the status light functions listed
above. The latest hardware interface specications, including status light information, are
available at help.smartAC.com.