User Manual

!
7!
INSTALLATION
INSTALLATION: transformations and maintenance below listed may only be carried out by a competent technician.
A wrong installation may provoke damage to persons, animals or things, for which the manufacture can not be held
reasonable for.
After having cleared out all the packing components, make sure of the integrity of the appliance before installing.
NOTE: DO NOT INSTALL THE BBQ IF ANY DAMAGE HAS BEEN FOUND ,REPORT TO SUPPLIER
Please keep children away from all packing elements (carton, polystyrene, )
TECHNICAL INSTRUCTIONS FOR INSTALLER
Put away and preserve all packaging parts in case they are required at a later stage for shipping.
Verify that all appliance parts are in the packaging.
Remove from the packaging one socket punch to use as a template later on to drill the six holes for wall bracket.
Choose the place on the wall suitable to install the BBQ considering the following.
● The thickness and strength of the wall as the BBQ‘s weight is 27.10 kg. It's recommended to use a brickwork wall
and to use Plastic plugs, dyna bolts or simular to hold the wall bracket to the wall. If you are not using a brick wall,
special attention will have to be taken to what the bracket is attached to. It must be able to hold weight of BBQ
● This appliance can only be installed outdoors, but must be protected from direct rain and have at least a 4 metre
clearance above the unit if a working rangehood or air ventilation/purification device is not installed.
● Verify that nearby is a power supply of at least 15 amp 120 volts and a circuit breaker connected to a RCD.
● Take the template to the wall and mark out six holes choose at height which is a suitable work height.
FIG 1
70 mm
FIG 2
66.5 mm