User`s guide

To transfer images to your computer

1. Use the OSD menu to set your document camera USB to PC mode to STORAGE.

2. Connect your document camera to your computer with the USB cable (see Setting up your

document camera on page 12).

Your computer recognizes your document camera and the external storage device as a

removable disk.

3. Browse to the removable disk on your computer, and then transfer the images to your computer.

Using a microscope

You can view the microscope stage through the document camera using additional attachments. See

Connecting your document camera to externaldevices on page 16.

To display a microscope slide

1. Place a slide or object on the stage of the microscope.

2. Focus the microscope so that the subject is in sharp focus.

3. Position the microscope under your document camera so the camera lens is aligned with the

microscope eyepiece.

C A U T I O N

Ensure you do not hit your document camera lens with the microscope. This could damage

your document camera’s lens.

Press the button on the control panel.

Press the button on the control panel to select , and then press the button on the

control panel.

Press the button on the control panel to select MODE, and then press the button on the

control panel.

Press the button on the control panel to select , and then press the button on the

control panel.

C H A P T E R 4

Using your SMARTDocumentCamera in Camera mode