User`s guide

l Use the features and settings in the on-screen display menu.
l Use a microscope with a standard eyepiece with additional adapters.
I M P O R T A N T
Your document camera must be connected directly to an external display when using the OSD
menu. See Connecting your document camera to externaldevices on page 16.
To switch to Camera mode
1. Connect your document camera to a projector or flat-panel display with the appropriate cable
(see Connecting your document camera to externaldevices on page 16).
2.
Press the button on the control panel.
To display objects
1.
Press the button on the control panel.
2. Place the object you want to display under the camera.
3. Rotate the camera head to aim the lens at your object.
To adjust the zoom magnification
Press the button on the control panel.
To automatically adjust the focus
Press the button on the control panel.
To adjust brightness settings
Press the button on the control panel.
To record a video
1. Insert an SD/SDHC card or USB drive into the appropriate receptacle.
2.
Press the button on the control panel to start recording.
3.
Press the button on the control panel to stop recording.
C H A P T E R 4
Using your SMARTDocumentCamera in Camera mode
32