User`s guide

5.
Press the button on the control panel to select , and then press the button on the
control panel.
See The Image tab on page 34 for an explanation of the settings.
To optimize the image for documents with graphics
1. Set your document camera to Camera mode.
2.
Press the button on the control panel.
The on-screen display menu appears.
3.
Press the button on the control panel to select , and then press the button on the
control panel.
4.
Press the button on the control panel to select IMAGE MODE, and the press the
button on the control panel.
5.
Press the button on the control panel to select , and then press the button on the
control panel.
See The Image tab on page 34 for an explanation of the settings.
Inserting and removing an SD/SDHC card
Your document camera has an SD/SDHC card slot on the right-side connection panel. You can save
document camera images to an SD/SDHC card when your document camera is in Camera or
Computer Pass-Through mode. When your document camera is in Playback mode you can display
previously captured images from an SD/SDHC card.
C A U T I O N
Avoid static electricity near a card because it can damage.
I M P O R T A N T
Your document camera comes with a piece of plastic inserted in the SD/SDHC card slot. Remove
this piece of plastic before you insert your SD/SDHC card.
C H A P T E R 3
Using your SMARTDocumentCamera
28