User`s guide

To set your document camera to Playback mode
1. Disconnect the USB cable from the rear connection panel.
2. Connect your document camera to a projector or a monitor with the VGA cable or to a television
with the composite video adapter cable if needed.
3.
Press the button on the control panel.
Displaying printed documents
When you set your document camera to Camera mode, you can display printed documents, use the
anti-glare sheet to reduce glare, and optimize the image for text and graphic documents with the
Image mode options.
To display printed documents
1. Place your documents on the table.
2. Adjust the document camera, and then aim its lens at your documents.
3.
Press the button on the control panel to adjust the focus.
To reduce glare
If glare makes it difficult for you to read the printed documents that you’re displaying, place the
anti-glare sheet on top of the printed documents.
To optimize the image for text documents
1. Set your document camera to Camera mode.
2.
Press the button on the control panel.
The on-screen display menu appears.
3.
Press the button on the control panel to select , and then press the button on the
control panel.
4.
Press the button on the control panel to select IMAGE MODE, and then press the
button on the control panel.
C H A P T E R 3
Using your SMARTDocumentCamera
27