User Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1 Welcome
- Chapter 2 Using basic features
- Chapter 3 Using the iQ apps
- Chapter 4 Connecting computers and other devices
- Chapter 5 Troubleshooting
- The display isn’t turning on
- The screen is blank or there’s a problem with the image on the screen
- There’s no sound or there’s a problem with the sound
- Touch isn’t working as expected
- The pens and erasers aren’t working as expected
- iQ apps aren’t working as expected
- SMART software on connected computers isn’t working as expected
- The SMART OPS PC module isn’t working as expected
- The Intel Compute Card isn’t working as expected
- Contacting your reseller for additional support
- Certification and compliance
Chapter 2 Using basic features
smarttech.com/kb/171554 15
Using the Home button
You can use the Home screen to open and use iQ apps, view the input of connected computers, and
more. You can also change the background and personalize other features of the Home screen. To
learn more about the Home screen, see Understanding
the Home screen.
The Input screen shows thumbnails of connected computers and allows you to switch among inputs.
You can return to the Home screen or the Input screen at any time by following the instructions below.
To show the Home screen or the Input screen on SMART Board MX (V3, V2 and V2-C) series displays
Tap the Home button
on the front control panel.
OR
Press the Home button on the remote control.
To show the Home screen or the Input screen on SMART Board MX series displays
Tap at the bottom of the screen.
Using the front control panel
Depending on the model, the front control panel contains buttons for returning to the iQ Home screen,
switching the input source, showing and hiding a screen shade, controlling the volume, freezing and
unfreezing the screen, and turning the display on and off.
SMART
Board MX (V3, V2 and V2-C) series SMARTBoard MX series
No. Name Procedure
1
Home Press to return to the iQ Home screen (see
Using
the Home button
above).
2
Input select Press to switch input source (see
Viewing a
connected computer’s input
on page35).