Operation Manual

X
Enter the desired frequency by pressing
the numbers.
The frequency is shown at the top right,
the dot is entered automatically.
X
Press OK and confirm the frequency
entered.
If the smart radio finds the respective
station, the display shows Playing
98.3 MHz, for example. The radio
display then appears.
i
You can only enter currently permitted
numbers.
If you enter a frequency that is outside
of the frequency range, audio system
navigation/multimedia sets the next
lower frequency.
Selecting a station by entering the
station name
You can use this function for FM wavebands.
X
Press symbol B in the radio display
(Y page 76).
The station preset memory appears.
X
Press the magnifying glass symbol in the
station preset memory.
X
Press Enter station name.
An input menu appears.
:
Entry line
;
To delete an entry
=
To enter numbers and special
characters
?
To enter umlauts
X
Enter a station name. Instructions for
entering characters can be found in the
"At aglance" chapter (Y page 15).
X
To confirm the entry: press OK.
The Searching... display appears. You
then see a list of stations that can be
received.
X
Press 9 or : to scroll in the list.
X
Press the desired station.
X
Press & to exit the list.
The selected station is played.
If no stationis found for an entry, G
not
found is shown, for example.
Storing stations
Storing stations manually
There are 32 preset positions available
each for the FM and FMT wavebands. You
cannot store stations manually in the FM
dynamic waveband. In the AM and AMT
wavebands, up to 12 stations can be stored.
X
Quick save: in the radio display, press
and hold one of preset positions 1 to 4
until you hear a confirmation tone.
The currently set station is stored to the
preset position selected.
78
Radio mode
>> Audio.