Operation Manual

911 emergency call
Making emergency calls without entering a
PIN is only possible using the mobile
phone.
The following conditions must be fulfilled
in order to make a 911 emergency call:
R
the mobile phone must be switched on.
R
a network must be available.
R
a valid and operational SIM card must be
inserted in the mobile phone.
R
the PIN must have been entered.
If you cannot make an emergency call, you
must arrange rescue measures yourself.
The 911 emergency call number is a public
service. Any misuse is punishable by law.
Telephony via the Bluetooth
®
interface
Conditions
Making calls via the Bluetooth
®
interface
with audio system navigation/multimedia
requires a Bluetooth
®
-capable mobile
phone.
Not all mobile phones available on the
market are equally suitable. Further
information about suitable mobile phones
and connecting Bluetooth
®
-capable mobile
phones to audio system navigation/
multimedia can be obtained at your smart
Center.
The battery of the mobile phone should
always be kept sufficiently charged in
order to prevent malfunctions.
In preparation for telephoning via the
Bluetooth
®
interface, you should check the
following items on your mobile phone (see
the mobile phone operating instructions):
X
Hands-Free Profile
The mobile phone must support Hands-
Free Profile 1.0 or above.
i
Some displays depend on the supported
version of the Hands-Free Profile.
X
Bluetooth
®
visibility
On certain mobile phones, the device
itself must be made "visible" for other
devices, as well as activating the
Bluetooth
®
function (see the mobile
phone operating instructions).
X
Bluetooth
®
device name
Every Bluetooth
®
device has its own
Bluetooth
®
device name. This device
name is freely definable, but can be
identical for all devices from the same
manufacturer. It is therefore
recommended that you change this name
so that you can easily recognize your
mobile phone (see the mobile phone
operating instructions).
Registering and connecting the mobile
phone
General information
You will need to register your mobile phone
before using it with the audio system
navigation/multimedia operating system
for the first time. The mobile phone is then
entered in the audio system navigation/
multimedia Bluetooth
®
phone list.
This process includes:
R
the search by the Bluetooth
®
mobile
phone
R
subsequent registration
If you want to reconnect a phone that has
already been registered, it is connected
automatically.
The Bluetooth
®
device name for audio
system navigation/multimedia is smart
Radio.
You can register a maximum of five
Bluetooth
®
devices (mobile phones and
Bluetooth
®
audio devices).
i
If the smart Radio Bluetooth
®
device
name is already in the mobile phone's
Bluetooth
®
device list, it may not be
possible to connect a mobile phone.
Telephony via the Bluetooth
®
interface
63
>> Telephone.
Z