Operation Manual

X
Press d in the navigation main menu
(Y page 31).
The settings menu appears.
X
Press POIs on map
.
The points of interest in the map menu
appears. It shows the available
categories.
X
To scroll in the list, press 9
or :.
X
To switch the category display on/off:
press a symbol.
Depending on the previous setting, the
display is switched on or off.
Blue tick All sub-entries are
shown.
White tick Some of the sub-
entries are shown.
X
To call up a sub-category: press a
category name.
Depending on the category, sub-
categories are shown for selection.
i
Changes within a category may also have
an impact on other categories.
Voice control system
At a glance
Overview
You can operate navigation mode using the
Voice Control System. Available commands
are shown in the individual displays and
are announced in some menus.
The voice control system confirms
important commands and gives
instructions when entries are
unsuccessful.
If you speak the commandunclearly or speak
a non-existent or incorrect command, the
device responds with "Please repeat your
comment".
i
While driving, you can only enter a
destination using the Voice Control
System.
Switching the Voice Control System on
X
Switch on navigation mode (Y page 31)
and call up the navigation main menu.
X
Press the display for longer than 2
seconds.
The Voice ControlSystem is switched on.
The available commands are shown as
light blue speech bubbles. An active
audio source is muted.
Voice control system
57
>> Navigation.
Z