Operation Manual

For adjusting the multifunction display
illumination, see “Adjusting instrument
cluster illumination” (Y page 93).
Main odometer display
Example illustration (U.S. vehicles)
i
Canada vehicles: The main odometer
display shows km instead of miles.
The main odometer display appears in the
multifunction display continuously.
Exception: The next maintenance service
is due. After starting the engine, days or
distance to next maintenance service will
appear instead of the main odometer
display. The main odometer display will
reappear after approximately ten seconds.
For information on how to select the
maintenance service interval display, see
“Maintenance service interval display”
(Y page 91).
Transmission position indicator
The following information is displayed in
the transmission position indicator:
R
Current gear selector lever position
R
Current engaged gear (when manual
gearshifting selected)
i
A flashing R in the display indicates
that the gear selector lever is in
position R but the reverse gear is not
engaged. Stop the vehicle to let the
reverse gear engage.
Example illustration (U.S. vehicles)
Display Function
P
Gear selector lever in park
position P
R
Gear selector lever in
position R (Reverse gear
engaged)
N
Gear selector lever in neutral
position N
D
Gear selector lever in drive
position D
When manual gearshifting is selected:
Display Function
1
First gear engaged
2
Second gear engaged
3
Third gear engaged
4
Fourth gear engaged
5
Fifth gear engaged
88
Instrument cluster
>> Controls.
BA 451 USA, CA Edition A 2011; 1; 4, en-US
hereepe Version: 3.0.3.6
2010-05-11T15:12:26+02:00 - Seite 88