Operation Manual

After an unsuccessful teaching-in: Three
bars instead of P appear in the
multifunction display.
X
Do not continue to drive.
X
Turn off the engine.
X
Engage the parking brake when leaving
the vehicle.
X
Contact Roadside Assistance or an
authorized smart center.
Instrument cluster
Multifunction display
The following displays and indicators
appear in the multifunction display:
Multifunction display (U.S. vehicles)
:
Status indicator with:
• Trip odometer display
• Reserve fuel indicator
• Maintenance service interval display
;
Main odometer display
=
Transmission position indicator
?
Digital clock
A
Outside temperature display
B
Fuel level display
Multifunction display (Canada vehicles)
:
Status indicator with:
• Trip odometer display
• Reserve fuel indicator
• Maintenance service interval
display
;
Main odometer display
=
Transmission position indicator
?
Digital clock
A
Outside temperature display
B
Freeze warning
C
Fuel level display
G
Warning!
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see
information about your driving
conditions, such as speed, outside
temperature, or warning/indicator lamps.
Driving characteristics may be impaired.
If you must continue to drive, please do so
with added caution. Visit an authorized
smart center as soon as possible.
Multifunction display illumination
The multifunction display illumination
comes on when the starter switch is in
position 1. It goes out after approximately
30 seconds when the starter switch is in
position 0.
Instrument cluster
87
>> Controls.
BA 451 USA, CA Edition A 2011; 1; 4, en-US
hereepe Version: 3.0.3.6
2010-05-11T15:12:26+02:00 - Seite 87
Z