User manual

Basic Operation

5.2.1 Update via USB

If you have Internet access, you should update your receiver via the USB interface.

1. Search for the upgrade file on the internet page www.avanit.tv (menu item Support).

2. If the version number of the update file matches with the version number of the software

of the receiver, which is displayed in the submenu Information of the menu Tools, you

do not need to do anything else. Your receiver is up to date. Otherwise continue with

step 3.

3. Save the update file to a USB data storage.

4. Unpack the file with the ending .abs.



Please note that the upgrade file (*.abs) is copied directly to the root

directory of the USB data storage (no subdirectory)!

5. Connect the data storage to your receiver.

6. In the menu Tools, select the sub-menu Upgrade by USB and press the OK key.

7. At Upgrade Mode, select the upgrade mode Allcode by using the keys und .

8. At Upgrade File, select the file copied in step 2.

9. Select the Start button and confirm by pressing OK.

A message saying that you will lose all personal settings will be displayed.

The upgrade will be performed after selecting

Yes

by using the keys und and

pressing OK. Then, the receiver will automatically perform new start.

5.2.2 Software Update via Satellite

smart can also upload the update file on the satellite Astra 19.2° E. You can then perform a

so-called OTA

update:

1. In the menu Tools, select the submenu OTA Upgrade.

2. Leave all settings unchanged (factory settings).



The option of software update via satellite is only possible via Astra

19.2°E. Correspondingly, all settings should be left unchanged in the

status as preset:

Line Target value

Satellite

(1/1) Astra 19.2°E

Transponder

(61/84) 12604 H 22000

Frequency

12604

Symbol rate

22000

Polarization

Download PID

343

OTA = Over The Air = via Satellite