Operation Manual

X
Press SpeechoutputSpeechoutput.
The "Speech output" menu appears.
X
Press StreetnamesStreetnames.
Depending on the previous setting,the
function is switched on or off.
Adjusting the volume for navigation
announcements
X
Turn cVd the control knob duringa
navigation announcement.
or
X
Set the volume of traffic announcements
compared to the volume of the active
audio source (Y page 18).
The volume of the active audio source is
lowered to the selected value for the
duration of the navigation
announcement.
Route information (Expert mode)
Callingupthe "Routeinformation" menu
X
Press the arrow at the bottom leftofthe
map (Y page 44).
The navigation main menu appears.
X
Press Route informationRoute information.
The "Route information" menu appears.
Callinguparoutelist
X
Press Directions
Directions in the "Route
information" menu.
The route listshows the street sections
yet to be traveled.
X
Press 9 or : to scroll in the list.
X
To close the route list: press &.
Setting the map to aroute position
X
Press Go to...Go to... in the "Route
information" menu (Y page 47).
Amenu appears.
X
Press Current position
Current position, DestinationDestination
areaarea, OverviewOverview or Starting pointStarting point.
The map shows the route sectionwith the
selected route position or acomplete
overview of the route.
Blockingasection of the route
It is possible to block more than one route
section. The number of active blocks can be
seen in the "Lengthofavoided route" and
"Start of avoided route" lists at the top
right.
X
Press Avoid route
Avoid route in the "Route
information" menu (Y page 47).
The "Length of avoided route" list
appears.
X
Press aselection option, e.g. 5km5km,to
select the extension of the block.
The "Start of avoided route" list
appears.
Route guidance
47
>> Navigation.
Z