Operation Manual

distance before the next change of
direction are shown.
Example: compass display
You see the following information:
R
current direction of travel
R
latitude coordinates
R
longitude coordinates
R
current height above mean sea level
R
number of satellites currently being
used
The bar underneath shows the following
information:
R
current height above mean sea level
R
current time (if route guidance is not
active)
R
remaining time to next destination
(intermediate stop, final destination)
R
remaining distance to next destination
(intermediate stop, final destination)
R
estimatedtime of arrival at next
destination (intermediate stop,final
destination)
X
To closethe compass display: press &.
Stopping routeguidance
X
Press Stop route guidanceStop route guidance in the
navigation main menu (Y page 31).
Route guidance is interrupted.
Destination reached
When you reach your destination, a
checkered flag is displayed on the right-
hand side of the display and route guidance
is ended automatically.
Navigation announcements
Switching navigation announcements on/
off
Option 1
X
To switch off: press W the control knob
briefly during anavigation
announcement.
X
To switch on: press the arrow indicating
the direction of travel on the map
(Y page 44).
The current navigation announcement is
repeated.
i
Navigation announcements are
suppressed during incoming or active
telephone calls.
Option 2
X
Press the arrow at the bottom left of the
map (Y page 44).
The navigation main menu appears.
X
Press d.
The settings menu appears.
X
Press Speech outputSpeech output.
The "Speech output" menu appears.
X
Press Speech outputSpeech output again.
Depending on the previous setting, the
function is switched on or off.
Announcing the street names
X
Press the arrow at the bottom left of the
map (Y page 44).
The navigation main menu appears.
X
Press d.
The settings menu appears.
46
Route guidance
>> Navigation.