User manual

11
You can also select the type of audio signal to HDMI and S/PDIF output. PASS THROUGH means that the receiver
delivers selected audio track in compressed mode on the selected output. Decoded stereo PCM means that the
receiver delivers selected audio track in decoded stereo mode on selected output. Due to limited number of audio
codecs integrated, not all audio signals have audio signal in Decoded stereo PCM mode. You can select HDMI
Audio out on MENU>Settings>System setting>TV out settings>HDMI audio and S/PDIF out
MENU>Settings>System setting>TV out settings>S/PDIF separately.
Fig. 14 TV settings and HDMI audio configuration
You can also control the equipment connected via HDMI cable. TV or AV receiver supports CEC. If CEC is selected
ON, the receiver switches ON TV and AV receiver, connected via HDMI. If an option Force TV stand-by is
selected, the receiver switches off all connected equipment as well. Pls note that Control TV volume option is not
mandatory for most TV-sets, and is usually supported only by AV receiver.
Option Convert 4:3 SD video works only for SD video with 4:3 aspect ratio. If NO is selected, no conversion
happens. If ON is selected, the system converts 4:3 video material in to 16:9 screen to keep to right geometry. If
scale is selected, the system fits video material as is.
6.1.5. Connecting to the Network
Skyter 3D HD is equipped with 10/100Mbit LAN and 150Mbit WLAN interfaces. In MENU>Settings>System
settings>Network you can see the available network and connection.