User manual

8
Fig. 7 Satellite LNB configuration, programs quick scan
6.1.2. Satellite setup
Before start the program search, add the satellite of you dish system installation, you plan to search the program on.
MENU>Settings>System setting>Antenna setup>Satellite setup. You can press green button and select satellite
from the list. Then insert the satellite dish installation parameters (LNB frequency type, Diseq port or none, frequency
control). During the satellite installation you can easily check the signal and the list of channels available on the
selected frequency by using menu’s Test transponder section. If a signal is successfully locked, you can quickly
scan programs from the selected transponder by pressing blue button. It helps to identify the satellite. See Fig 8 and
Fig 9. No information is saved this time. When the Satellite configuration is finished, press yellow button to confirm
and save you satellite configuration. When a screen keyboard opens, please type or confirm the satellite’s name and
press “ok”. A new satellite is now added to the list. You can edit or delete it from this menu using a yellow button.
Fig. 8 Satellite list