User manual
26
8.3. Time shift
Press FREEZE button to enter time shift mode. Picture is paused at that moment, the time shift/pause icon appears
on the screen. Press FREEZE again and video is playing again with the time delay. Time shift/playback icon will
appear on the screen. To see the time delay length press INFO. The search line appeas on the screen. Use /
keys to move inside the time shifted video.
8.4. Selection of audio track and subtitles
You may quickly select the audio track (in the desired language) by pressing LANG (LANGUAGE) button. The
window with all available languages will appear on the screen. Use / buttons to select and press OK button to
confirm.
If there is subtitle information, you may turn it on, turn it off or select the language by using SUB (SUBTITLE) button.
This selection is the same to the language selection.
8.5. Television, radio
Channel mode such as television, radio or both television and radio may be selected by double pressing TV/R
button. The following notes appear on the TV screen: TV, Radio. They indicate the type of channels in the the
channel list and the infobar.
8.6. Recordings
Press TIMER button to enter directly into the recordings schedule menu.
8.7. Channel list
Press OK button to enter directly into the channel list., Ошибка! Источник ссылки не найден.. Press blue button
to select active favorite channel list instead of all channels. Press yellow button to select the channels of a selected
broadcaster. Use green button to filter by Transmitters. Red button activates immedeate record. The opened pop-up
window allows you to monitor the end time of the program to be recorded. To start the immedeate record on play
back screen(with no other menu opened), press REC button on medialyer section keys of the remote control. To
stop the immedeate record, press stop button on media player section keys on the remote control. Right part of the
window shows and follows the selected program information available.
Fig. 37 Channel list
If you have single LNB connection and recording schedule run at the same time you can switch channel only on the
same satellite/polarization/band. In this case inaccessible channels will are dark in the channel list. Press Info button
and a pop-up window appears showing the extended program guide information.