User manual

23
program classed above that age by the broadcaster is restricted, and to turn on the menu lock.
In order to change the parent menu settings, you must enter the password. Initial password is 0000. When you enter
the parent menu for the first time, you must change this password. Enter a new password consisting of 4 numbers,
enter them again to confirm and press “apply”.
Do not forget your password. Otherwise, to unlock the menu, you will have to apply to the service
companies for receiver software rewriting.
Fig. 34 Parent menu
Broadcasters usually provide information on age limits for each channel. Child age line allows you to set the child
age for watching age-restricted channels. If the age set is less than the age specified by the channel broadcaster,
the channel will be automatically locked. Every time you turn on this cannel, the system requests to enter the
password to unlock it. Programs search and defaults menus are automatically locked as well.
This function also locks all menus which allow settings changes or the receiver options changes – channel search
menu, system setting menu, favorite menu, channel manager menu. Enter the password to access.
7.9.5. System functions
Check SW update from USB
You can update you software and download the latest available version from www.skyter.tv. Create NXP folder on
the USB flash drive. Save the file with updates on USB flash drive inside NXP folder. Attach it to system. Select this
menu option and the system will scan USB flash drive and show the available software. Pls note, that any attempts
to update the system with any unofficial software will cause No Warranty case!
Backup channel database
You can save and download you setting and channel base back into system.
We recommend you to save you channel database each time before the system software update. You will always
restore you channel list and settings in case the system data base format changes during the update.
Standby mode
Standby mode. Active STBY means that CPU is permanently in load by OS(Operational System) and is capable for
immediate operation, only tuners and peripherals are partially switched off. Active STBY provides less power saving
but faster to wake up.
Passive STBY mode means that CPU is shut down and only standby controller is alive. Some time is needed to
wake up the system and to load the OS(Operational System). In passive mode max power is saved (less 1Watt.) In
case Stand-by mode is selected passive and you press off button on the remote control, the system switches on the
active mode immediately. If no further action follow on the local keyboard or on the remote control within the next 10
sec, the system switches into passive mode and CPU shuts down. Quick wake up is possible within 10 sec active
mode. If no signal follows, the system goes to Stan-by mode after the selected time.
System time
System time setting (correction) is provided automatically. You can select the option to “synchronize from the
internet or DVB”.