User manual

Fig. 17 Main menu

7.3. Channel search

After a new satellite is added, you can search programs on it.

For automatic satellite search MENU>Settings>Channel search>Satellite Auto search, the receiver requires the

list of transponders on the selected satellite. Thus, during automatic satellite search the receiver will search channels

according to the transponder list only. You can add new transponder data, save them, edit them or delete them on

MENU>Settings>Chanel search>Satellite transponders. See Fig 18.

Fig. 18 Satellite transponder

MENU>Settings>Channel search>Satellite auto search you can select a satellite(from the list of previously

added) and scan channels on the selected transponder only or on all transponders available. Press blue button to

check the list of channels available on the selected transponder. (no information is saved). You can also select the

network scan ON. In this case, when the channels search is finished on the selected transponder, the receiver will

check NIT table. In case NIT table is available, the receiver takes the transponders table from NIT and search

channels on these transponders as well. If you select search style update, the system will add new found channels,

Alternatively, if you select full search, the system will delete all channels from the selected satellite and replace them

with the newly scanned. Press red button to start the search.