User manual

11
that the receiver will deliver selected audio track in decoded stereo mode on selected output. Due to limited number
of audio codecs integrated, not all audio signals will have audio signal in Decoded stereo PCM mode. You can select
HDMI Audio out on MENU>Settings>System setting>TV out settings>HDMI audio and S/PDIF out
MENU>Settings>System setting>TV out settings>S/PDIF separately.
Fig. 14 TV settings and HDMI audio configuration
6.1.5. Connecting to the Network
Skyter 3D HD is equipped with 10/100Mbit LAN and 150Mbit WLAN interfaces. In MENU>Settings>System
settings>Network you can see the available network and connection.
Fig. 15 Network list
If a LAN cable is plugged into the network, you can see actual link speed. By selecting a corresponded network
connection, you can connect to the selected WLAN Access Point (AP), see or adjust network setting by pressing OK
button. The receiver will request AP for connection. If it is a password protected network, the screen keyboard will
open for password input. Next time the receiver will remember the passwords for the few last successfully connected
AP and will connect to it automatically. Press blue button and enter the name of the hidden WLAN to connect it.