User's Guide

6310™ Application Ready Platform (SYS6310) User Guide System Setup and Usage

003829 Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 8

Confidential and Proprietary – SMART Wireless Computing, Inc.

Provided under NDA

3.2.2 FASTBOOT MODE

Follow the below steps to enter fastboot mode.

1. Connect 6310

Application Ready Platform (SYS6310) and host PC using a Micro USB cable

2. Power on the board.

3. Once the device is booted up, open the command prompt in the host PC and enter the

following commands

 adb devices

4. Once adb device is listed, enter bootloader using following command:

 adb reboot bootloader

5. To confirm if the device has entered fastboot mode, use below command

 fastboot devices