User's Guide

6310™ Application Ready Platform (SYS6310) User Guide System Setup and Usage

003829 Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 7

Confidential and Proprietary – SMART Wireless Computing, Inc.

Provided under NDA

3.2 HARDWARE OPERATION

3.2.1 STEPS TO BOOT 6310 APPLICATION READY PLATFORM (SYS6310)

Connect the DC power adaptor to the 6310

Application Ready Platform (SYS6310)

NOTE



Carefully connect the DC connector to the jack provided on the board.

CAUTION



Use 12V, 2A DC Adaptor.

1. Connect the HDMI Out to a compatible display using an HDMI cable.

2. Switch ON the DC adaptor.

3. The board will boot up automatically.

NOTE



First time booting might take longer time than normal booting.

4. Android Version: After a few minutes, the "

android

" logo followed by the

lock screen

will be

displayed on the screen.

Mating Plug Specification for DC Jack



Current rating 2 A



Working Voltage:12V DC