User's Manual

01/18/2022 B01-007B User Manual Rev2.1 Page 4 of 6
PRODUCT DESCRIPTION
The B01-007B is bait station trap detection device used to indicate whether the trap is in
an open or closed state and to assign a timestamp for when the trap is detected is closed. The
device uses a hall sensor to determine if the trap is closed utilizing a magnet in the trap
housing. The B01-007B connects to a mobile phone app, via Bluetooth, to send this information
and the phone will upload this to a cloud server.
PRODUCT INSTALLATION
The B01-007B is installed in a plastic housing and sonically welded to provide complete
protection from the various installation environments and rodents. A CR-123 or CR2477 battery
(housing dependent) must be connected to the B10-007B before installation into plastic
housing
PRODUCT OPERATION
Once powered, the device will advertise for 30 seconds before going to sleep. Closing
and opening the trap will wake the device up and it will again advertise for 30 seconds before
going back to sleep. This operation will happen for device that are unregistered (Factory Mode).
For devices that are registered and installed in the field, the device will continually
advertise every 1.5 seconds