User Manual

Bell Sensing Technologies Training Manual | 88
BELL SENSING APP
In order to service a 24/7 iQ multi-
catch mouse trap and receive the
information from the sensor, you
will need to be inside the range
to download the data. That range
is typically within 5-10 feet of
the device. While in the device
list screen, you will see circles
for each device. When the hollow
circle fills in to become a fully
colored circle, you have reached the
“downloadable” range. After you
are inside that range, you may tap
the full circle to begin the download.
This will only take a few seconds.
SERVICING A 24/7 iQ
™
TRAP
Once the information is
downloaded, the screen will
pop up giving you the service
options.
If nothing is captured in
the device, you would
tap “NO CAPTURE”. If
something is captured
in the device, you would
tap “CAPTURE”.
Next, tap “Capture Type” and choose
what was captured from the drop-down
list, choose the gender, manually type in
the number for “Total Captures” and tap
“ADD”. You can repeat these steps if there
are multiple species of animals captured.
On this screen you may choose one of the
“Quick Notes” to document the conditions
of the trap. Additionally, you have the
ability to document any custom notes you
may have if needed. However, this is not
mandatory. Once you have completed the
above steps you would now tap the blue
check in the bottom right-hand corner. This
concludes the service of the device.
On the device list you will now
see a full green circle with a
check to indicate the device
has been fully serviced.