User Manual

Bell Sensing Technologies Training Manual | 85
BELL SENSING APP
In order to service an iQ bait station
tray and receive the information
from the sensor, you will need to be
inside the range to download the
data. That range is typically within
5-10 feet of the device. While
in the device list screen, you will
see circles for each device. When
the hollow circle fills in to become
a fully colored circle, you have
reached the “downloadable” range.
After you are inside that range, you
may tap on the full circle to begin
the download. This will only take a
few seconds.
SERVICING AN EXPRESS iQ
™
TRAY & AMBUSH iQ
™
TRAY
Once the information is
downloaded, the screen will
pop up giving you the service
options.
If you are baiting in the station,
there will be the option to
either refill or not refill the
bait. If you are trapping in the
station, there will be an option
for documenting a capture.
If you are doing both, both
options will be displayed.
For Baiting:
• When you are not refilling
the bait - tap “Not Refill”.
When you are refilling the
bait - tap “Refill”.
To document the bait type,
tap the “Bait Type” and
choose the bait you are
using from the provided list.
Next, tap the “Amount Used”
section and manually type in
the number used.