User Manual

Bell Sensing Technologies Training Manual | 83
BELL SENSING APP
Once you have tapped the
“Device List” icon and are viewing
the listing of devices there is an
option to filter what you are viewing.
Tap the “FILTER” icon in the
upper right-hand corner.
VIEWABLE DEVICE FILTER
The first option you have is to
filter to only display close devices.
This will filter out any devices that
are not within viewable range. To
do that slide the slider from left to
right and hit “APPLY”.
The other option you have is to
filter all the devices by the following
categories: Service Required,
Serviced, No Events, and Not
Detected. The default setting is
for all of them to be checked.
Tap on the category you would like
to “uncheck”.
Set the filter to your preferences
and tap on “APPLY”. Your Device
List will now be filtered to your
custom settings.