User Manual

Bell Sensing Technologies Training Manual | 76
BELL SENSING APP
To add an Express iQ
or Ambush iQ tray, go
to Account Dashboard
screen and hit Add
Device.
ADDING AN EXPRESS iQ
™
TRAY & AMBUSH iQ
™
TRAY
Scan Express iQ tray’s QR
code to add device, then name,
number tray and add location.
Within the location description
it’s important to input a concise
description to help locate and
know you are at the correct
device in the future. On this
screen you have the ability to
add any custom notes you may
have if needed. However, this is
not mandatory.
For an Express iQ tray there
are a few more steps. If you
will be baiting or trapping in
an Express iQ tray tap “Add
Bait/T-Rex”. For baiting,
tap on the “Bait Type” and
choose the bait you are
using. Next, tap the “Amount
Used” section and manually
type in the number used.
For trapping, slide the
slider on the left-hand side
of “Include T-Rex” from left
to right.
Note: Ambush iQ trays do not
hold T-rex traps.
Once you have completed the
previous steps you would now
tap on the blue check in the
bottom right-hand corner.
On the “Add the device” screen
that pops up, tap on the blue
check in the bottom right-hand
corner again. This concludes
the adding of the device to
the account.