User manual

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
85 smarttech.com/kb/170401
Command Response Powered off
get modelnum modelnum=UF70, or
UF70w
no
Return the actual model of the projector
set videomute [target] videomute=[current] no
get videomute videomute=[current] no
set vgaoutnetenable
[target]
vgaoutnetenable =
[current]
yes
get vgaoutnetenable vgaoutnetenable =
[current]
yes
set
emergencyalertmsg
[target]
emergencyalertmsg =
[current]
no
get
emergencyalertmsg
emergencyalertmsg =
[current]
no
set emergencyalert
[target]
emergencyalert=
[current]
no
get emergencyalert emergencyalert=
[current]
no
get signaldetected signaldetected=
[current]
yes
The response varies depending on the power
mode.
Field definitions
Field Possible Values Description
target autosignal l = on
l = off
The ranges must match the OSD ranges
current autosignal l on
l off
The ranges must match the OSD ranges
target lampreminder l = on
l = off
The ranges must match the OSD ranges
current lampreminder l on
l off
The ranges must match the OSD ranges