User manual

C H A P T E R 3
Using your interactive whiteboard system
18 smarttech.com/kb/170401
Setting Use Notes
Network menu
Network and
VGAOut
Activates the projector’s RJ45
connector and network
features.
Status Displays the current network
status (Connected,
Disconnected or Off).
The default is off.
DHCP Displays the status of the
network’s Dynamic Host
Configuration Protocol (DHCP)
as On or Off.
The default is on.
On enables a DHCP server on the network to
automatically assign an IP address to the
projector.
Off enables an administrator to assign an IP
address manually.
Password
Reminder
E-mails the network password
to the predefined e-mail
recipient.
See Web page management on page 57 to set
up a destination e-mail address.
IP Address Displays the projector’s current
IP address in values between
0.0.0.0 and 255.255.255.255.
To change the projector’s IP address, use the
RS-232 connector (see Network controls) or
use a DHCP server to assign a dynamic IP
address, and then set a static IP address
using the network remote management feature
(see Remotely managing your system through
a network interface on page 57).
Subnet Mask Displays the projector’s subnet
mask number in values
between 0.0.0.0 and
255.255.255.255.
Gateway Displays the projector’s default
network gateway in values
between 0.0.0.0 and
255.255.255.255.
DNS Displays the projector’s primary
domain name server (DNS) IP
address in values between
0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector’s MAC
address in xx-xx-xx-xx-xx-xx
format.