User's Manual

3. Click SMART Board Settings.
4. If you have more than one interactive whiteboard connected, select the icon for the correct product. The
Hardware Info & Settings window opens, displaying a summary of the hardware, software and firmware
installed on your interactive whiteboard.
5. If the firmware version displayed is earlier than 2.0.6.0, navigate to C:\Program Files\SMART
Technologies\SMART product drivers\Firmware.
6. Locate and double-click the latest SB-W.X.Y.Z Flash.exe file, where W.X.Y.Z represents the firmware
version number, to open the SMART Firmware Upgrade Wizard.
7. Follow the on-screen instructions to install the file. When your computer and interactive whiteboard are
communicating by means of the USB interface using the latest software and firmware, you’re ready to set
up the wireless Bluetooth connection kit.
8. Disconnect the USB cable from your computer and interactive whiteboard.
37 | CONNECTING YOUR
INTERACTIVE WHITEBOARD TO YOUR COMPUTER
To set up the wireless USB adapter:
1. If necessary, follow the instructions in Appendix A, to install your wireless Bluetooth connection
expansion module, and then connect your interactive whiteboard to an AC power receptacle. The LED
indicator on the expansion module and the Ready light start flashing.
– The Ready light flashes green continuously, indicating that your interactive whiteboard is communicating
with the USB interface of the wireless Bluetooth connection expansion module.
– The expansion module’s LED flashes green fourteen times, and then turns red for approximately five
seconds before repeating the sequence. This pattern indicates that the expansion module isn’t
communicating with its Bluetooth-to-USB converter.
2. Press the power button on your computer to start it.
3. Connect the Bluetooth-to-USB converter to an available USB receptacle on your computer. The Ready
light and the expansion module’s LED turn steady green, indicating successful communication between the
wireless Bluetooth connection components.
NOTE
If the expansion module’s LED continues to flash, press the pairing button on both the expansion module
and the Bluetooth-to-USB converter.
Wireless Component Pairing:
The expansion module and the Bluetooth-to-USB converter are “paired” at the factory so that they will only
communicate with each other. You can synchronize the components at any time, as required. Both the
wireless USB expansion module and its USB converter have a pairing button. Install both the expansion
module and the converter, and then press the pairing button on one of the devices. It stays in pairing mode
for up to two minutes, giving you time to press the companion device’s button. When you press the pairing
button on the other device, the devices detect each other and enter Discovery mode. If you don’t press the
companion device’s button within this interval, the first device returns to its normal mode. After an
expansion module and its USB converter are paired, they remain associated with each other indefinitely.