User's Manual

Wireless Kit:
The wireless Bluetooth connection kit uses Bluetooth technology to enable you to wirelessly connect your
interactive whiteboard to your computer. The expansion module also powers your interactive whiteboard
with its external power supply.
In addition to the external power supply, the wireless Bluetooth connection kit consists of the following
two key components:
• GU3706 a Bluetooth-to-USB expansion module that connects to the controller module
• GU3705 a Bluetooth-to-USB converter that connects to your computer
Caution
Use only the power supply included with the wireless Bluetooth connection kit. Using other power supplies
might create a safety hazard or damage the equipment. Although your interactive whiteboard won’t be
damaged if you connect a power supply with a negative voltage on the connector's tip to the controller
module, a computer or extender connected to the USB interface might be damaged by reverse polarity.
Notes:
• Follow the procedures outlined in this section only if your interactive whiteboard is fitted with the
optional wireless Bluetooth connection expansion module. Refer to appendix A for pictorial view of
installing wireless modules.
• This option isn’t available for Dual Touch SMART Board SBD600 series interactive whiteboards.
• The SMART Board interactive whiteboard Bluetooth-to-USB converter can’t be used as a general-
purpose USB-to-Bluetooth adapter. It only works with the SMART Board interactive whiteboard
Bluetooth-to-USB expansion module.
CONNECTING YOUR INTERACTIVE WHITEBOARD TO YOUR COMPUTER
Before setting up the wireless Bluetooth connection,
• Remove all versions of SMART Board software, SMART Notebook software or SMART product drivers
installed on your computer, and then install the version of SMART product drivers included with the
wireless Bluetooth connection kit, even if it’s the same version. Reinstalling this software ensures that you
enable all of its necessary features. If you don’t know how to remove software, ask your system
administrator. Refer to page 29 of SMART Board™ 600 and SBD600 Series Interactive “Whiteboard
Installation and User’s Guide” for details on installing SMART product drivers.
• Ensure that your computer can communicate with your interactive whiteboard using a wired USB
connection by connecting the included USB cable as described on page 27 SMART Board™ 600 and
SBD600 Series Interactive Whiteboard Installation and User’s Guide. This step enables you to check that
SMART product drivers and the installed firmware version support the wireless Bluetooth connection kit.
• Verify that you have controller firmware 2.0.6.0 or later installed on your interactive whiteboard, as
described in the following procedure.
To verify the firmware version:
1. If SMART Board Tools isn’t already running, select Start > All Programs > SMART Technologies >
SMART product drivers > SMART Board Tools.
2. Click the SMART Board icon in the Windows notification area or Mac Dock, and then select Control
Panel. The SMART Notebook control panel opens.