User's Manual
Table Of Contents
- Product Registration
- Important Information
- Contents
- About Your SMART Board 600 or SBD600 Series Interactive Whiteboard
- In This Chapter
- Features
- How Does Your SMART Board Interactive Whiteboard Work?
- Included Accessories
- Optional Accessories
- Serial RS-232 Expansion Module
- The serial expansion module connects to the controller module on the back of your interactive whiteboard.
- Wireless Bluetooth Connection
- SystemOn Expansion Module
- USB Audio System
- Active USB Extension Cables
- Projector Wall-Mount (Models 680 and SBD680 only)
- SMART Board Interactive Whiteboard Floor Stand (Models 640, 660, 680 and SBD680 only)
- SMART Board Interactive Whiteboard Table Stand
- Installing and Securing Your SMART Board Interactive Whiteboard
- In This Chapter
- Environmental Requirements
- Mounting Your SMART Board 660, 680 or SBD680 Interactive Whiteboard on a Floor Stand
- Wall-Mounting Your SMART Board Interactive Whiteboard
- Securing the Pen Tray and Interactive Whiteboard
- Removing the Pen Tray
- Connecting Your Interactive Whiteboard to Your Computer
- In This Chapter
- Overview
- System Power Safety and Precautions
- Connecting with a USB Cable
- Installing SMART Product Drivers
- Connecting Using the Optional RS-232 Serial Expansion Module
- Connecting with the Wireless Bluetooth Connection Option
- Configuring Your Computer Settings
- Orienting Your Interactive Whiteboard
- Connecting a Guest Laptop
- Connecting Multiple Interactive Products
- Using and Maintaining Your SMART Board Interactive Whiteboard
- Troubleshooting Your SMART Board Interactive Whiteboard
- In This Chapter
- Adjusting the Projected Image
- Resetting Your Interactive Whiteboard
- Troubleshooting Using the Ready Light
- Flowchart 1: Getting Started
- Flowchart 2: Ready Light Off
- Flowchart 3: Ready Light Red
- Things to try first:
- • Disconnect and then reconnect the USB cable at both ends to reset your interactive whiteboard and reestablish the link.
- • If the Ready light changes from green to red while your computer is running, the computer might become unresponsive. Restart your computer.
- • An alternating red/green light might indicate that your computer is running too many other applications or doesn’t meet minimum specifications. Reduce the load on your computer by closing unnecessary applications, or replace it with a more powe...
- Things to try first:
- Flowchart 4: Ready Light Flashing Green
- Flowchart 5: Ready Light Steady Green
- A steady green Ready light indicates that the controller is operating normally. If the pen tray failed or isn’t communicating with the controller, your interactive whiteboard will still operate in mouse mode. When you reset your interactive whitebo...
- Troubleshooting Tips
- Where to Find More Information
- Contacting SMART Technical Support
- Hardware Environmental Compliance
- Customer Support
- Index
52 | USING AND MAINTAINING YOUR SMART BOARD INTERACTIVE WHITEBOARD
The Ready Light
You can see the Ready light in the lower-right corner of your interactive whiteboard’s
frame. The Ready light indicates the controller module’s operating states.
The following table shows the Ready light’s normal states. If the indicator’s behavior
doesn’t match a state listed here, refer to Troubleshooting Using the Ready Light
starting on page 57.
Ready Light State Meaning
Solid red Your interactive whiteboard is receiving power from
the USB cable or an optional expansion module’s
power adapter, but your interactive whiteboard isn’t
communicating with a computer.
Solid green Your interactive whiteboard is receiving power and
it’s communicating successfully with SMART
product drivers.
Flashing green Your interactive whiteboard is receiving power and
it’s communicating successfully with the USB HID
driver of your computer’s operating system.
NOTE
In HID mode, interactive whiteboard tools such
as the pens and the eraser won’t work, but you
can move the mouse pointer and perform
mouse functions by touching the interactive
screen. The Right-Click button on the pen tray
might work, depending on the version of
Windows operating system you’re using.
Neither the Keyboard nor the Help button will
work.
Flashing or solid amber The controller module is in a service mode or it has
detected a software error. Refer to the
Troubleshooting section on page 55.
Ready Light