User's Manual
Table Of Contents
- Product Registration
- Important Information
- Contents
- About Your SMART Board 600 or SBD600 Series Interactive Whiteboard
- In This Chapter
- Features
- How Does Your SMART Board Interactive Whiteboard Work?
- Included Accessories
- Optional Accessories
- Serial RS-232 Expansion Module
- The serial expansion module connects to the controller module on the back of your interactive whiteboard.
- Wireless Bluetooth Connection
- SystemOn Expansion Module
- USB Audio System
- Active USB Extension Cables
- Projector Wall-Mount (Models 680 and SBD680 only)
- SMART Board Interactive Whiteboard Floor Stand (Models 640, 660, 680 and SBD680 only)
- SMART Board Interactive Whiteboard Table Stand
- Installing and Securing Your SMART Board Interactive Whiteboard
- In This Chapter
- Environmental Requirements
- Mounting Your SMART Board 660, 680 or SBD680 Interactive Whiteboard on a Floor Stand
- Wall-Mounting Your SMART Board Interactive Whiteboard
- Securing the Pen Tray and Interactive Whiteboard
- Removing the Pen Tray
- Connecting Your Interactive Whiteboard to Your Computer
- In This Chapter
- Overview
- System Power Safety and Precautions
- Connecting with a USB Cable
- Installing SMART Product Drivers
- Connecting Using the Optional RS-232 Serial Expansion Module
- Connecting with the Wireless Bluetooth Connection Option
- Configuring Your Computer Settings
- Orienting Your Interactive Whiteboard
- Connecting a Guest Laptop
- Connecting Multiple Interactive Products
- Using and Maintaining Your SMART Board Interactive Whiteboard
- Troubleshooting Your SMART Board Interactive Whiteboard
- In This Chapter
- Adjusting the Projected Image
- Resetting Your Interactive Whiteboard
- Troubleshooting Using the Ready Light
- Flowchart 1: Getting Started
- Flowchart 2: Ready Light Off
- Flowchart 3: Ready Light Red
- Things to try first:
- • Disconnect and then reconnect the USB cable at both ends to reset your interactive whiteboard and reestablish the link.
- • If the Ready light changes from green to red while your computer is running, the computer might become unresponsive. Restart your computer.
- • An alternating red/green light might indicate that your computer is running too many other applications or doesn’t meet minimum specifications. Reduce the load on your computer by closing unnecessary applications, or replace it with a more powe...
- Things to try first:
- Flowchart 4: Ready Light Flashing Green
- Flowchart 5: Ready Light Steady Green
- A steady green Ready light indicates that the controller is operating normally. If the pen tray failed or isn’t communicating with the controller, your interactive whiteboard will still operate in mouse mode. When you reset your interactive whitebo...
- Troubleshooting Tips
- Where to Find More Information
- Contacting SMART Technical Support
- Hardware Environmental Compliance
- Customer Support
- Index
5| ABOUT YOUR SMART BOARD 600 OR SBD600 SERIES INTERACTIVE
WHITEBOARD
Included Accessories
Your SMART Board 600 or SBD600 series interactive whiteboard includes the
following accessories. To purchase replacement parts, contact your authorized
SMART reseller.
SMART USB Cable
An included 16' 5" (5 m) USB cable enables you to connect
your SMART Board 600 or SBD600 series interactive
whiteboard to a USB receptacle on your computer.
Pens
The pens have rubberized grip areas, colored to match
four colors of digital ink: black, red, green and blue.
You can use dry-erase markers instead of the included
pens, as long as they are a similar shape, don’t scratch or mark your interactive
whiteboard’s surface and reflect infrared light. If the substitute isn’t reflective
to infrared light, the pen tray sensors might not detect the presence of the pen.
You can use Sanford EXPO markers as substitutes.
NOTES
Some of SMART’s older pens aren’t designed to reflect infrared light and the pen
tray sensors might not detect them reliably.
TIP
Wrap light-colored tape around a substitute pen to improve the reflection
of infrared light, helping with tool detection.
Eraser
The eraser is rectangular to mimic a traditional
chalkboard eraser. Again, you can use a substitute
object, as long as it has a similar shape, doesn’t
scratch or mark your interactive whiteboard’s surface
and reflects infrared light.
SMART Board Interactive Whiteboard Wall-Mounting Kit
The 32" (81.3 cm) wall-mount bracket comes with five screws and drywall anchors,
enabling you to wall-mount your interactive whiteboard simply and securely.
NOTE
Models 685, SBD685, 690 and SBD690 come with two wall-mounting kits.